As of version 7 of the Sense firmware Sense
Navigation is no longer installed in the firmware of the Sense Notetaker.
If you are currently
a registered SenderoMaps 2012 user, see the SenderoMaps Manual’s section on using the check for updates
feature to download maps to your computer.
Also see the section on synchronizing to card or remote device. Using SenderoMaps
to install makes the process much easier as installers, license keys maps and
POIs are automatically placed in the proper place.
Follow the below instructions to install Sense
Navigation without the use of SenderoMaps.
In order to upgrade or purchase, Sendero or your
local dealer will need the following information.
1.
Your Sense Notetaker’s
serial number. If you don’t know the serial number already, this can be located
on the bottom of your note-taker. It is
in print and in Braille.
2.
Your Sense note-taker’s MAC
address. To obtain this information go
to the program menu, press H for help, then scroll to information or press
I. If your Notetaker has two MAC addresses we need the first one.
Once your account has been set up to download your
product and maps follow the below steps:
1.
Go to http://www.gosendero.com
and login with your User Id and password.
Note: your User Id is no longer your serial number. Instead it is your device’s MAC address. Your MAC address is located in the
information section of help. From the
program menu, press H for help, then scroll to information or press I.
2.
Download the SenseNavigation_2012_US_English.zip
or SenseNavigation_2012_UK_English.zip file depending on your language. Other languages will be forth coming in the
near future. Make a note of your Sendero
License Key while logged into your account as you will need this in Step 8.
3.
You can also download the 2012 maps and
POIs for your state, province or country.
Download and unzip the maps to the Maps folder of your storage card.
4.
Using a USB cable, connect your Sense Notetaker to your computer and unzip the installer zip file
to the root of your flash disk. If you
go into file manager you should see a folder called “Sense Navigation”
on your flash disk. You can also just unzip the SenseNavigation_2012_US_English.zip or
5.
Disconnect the USB cable from the Sense Notetaker.
6.
Revive the Sense Notetaker
by pressing and holding the forward media key and pressing the reset
button. Keep the forward media key held
down until you hear the musical chime.
Note: the forward media key is to the left of the power switch.
7.
Press V or scroll to Sense Navigation
and press ENTER. The installation
process will start. When prompted press
the reset button one more time.
a. If
the installation does not start either you didn’t unzip and put the “Sense
Navigation” folder on the root of your Flash Disk correctly in Step 3, or you
still have your USB cable connected to your computer which you should have
removed in Step 4.
b. If
that is not the problem maybe you didn’t get a complete download in Step
2. Make sure the file size of the zip
file matches what the website says is the file size,
8.
After you have performed the normal
reset as per the installation instructions and the system has restarted press
the V key to start Sense Navigation 2012.
9.
If this is your first time installing
Sense Navigation, you will be prompted for your license key. Your Sendero License Key is located in your
account at http://www.gosendero.com.
Note: You will need to reinstall Sense Navigation if
your battery goes flat or you have removed your battery because it is not in
the firmware. It is recommended to leave
the Sense Navigation folder on your flash disk, in this way all you will need
to do is press V to start the Sense Navigation installation after the revive.